Creating a program

CD Program Memory (CD changer with program memory function)

You can play the tracks in the order you want by making your own program. You can make two programs: Program 1 and Program 2. You can select up to 12 tracks in each program. You can store the programs in memory.

1 Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

Program edit mode

CD2 DISC

TRACK

EQ2

3 P101

PLAY MODE

ENTER

“P 1” shows Program 1 is selected.

 

If you have labeled the disc, the bank edit

 

mode appears. Press (3) (PLAY MODE) to

 

display “P 1” above.

 

 

EN

To select Program 2, press (4) (n)

 

repeatedly until “P 2” appears.

2 Select the track you want.

1Press (SOURCE) repeatedly to select the changer.

2Press (SHIFT), then press the number button to select the disc.

3Press (SHIFT).

4Press either side of (SEEK/AMS) to select the track.

3 Press (5) (ENTER) momentarily.

P1

ENTER

PLAY MODE

ENTER

 

µ

CD2 DISC

TRACK

32 P102

PLAY MODE

ENTER

4 To continue entering tracks, repeat steps

2 and 3.

5 When you finish entering tracks, press

(3)(PLAY MODE) for two seconds.

16

Notes

*WAIT*” appears in the display while the unit is reading the data, or when a disc has not been put into the unit.

*FULL*” appears in the display when you try to enter more than 12 tracks into a program at one time.

Playing the stored program

Changing the disc order in the changer will not affect program memory play.

You can select:

•PGM 1 to play Program 1. •PGM 2 to play Program 2.

•PGM 1+2 to play Programs 1 and 2.

1 Press (SHIFT).

2 Press (3) (PLAY MODE) repeatedly until “PGM” appears.

3 Press (4) (n) repeatedly until the desired progarm appears.

 

z PGM-1

 

z PGM-2

 

z PGM-1+2

 

 

 

 

 

 

 

 

PGM-OFF Z

 

 

 

 

 

 

 

To go back to the normal playback mode, select “PGM-OFF” in step 3 above.

Notes

If you press the number button during program memory play, program memory play is interrupted, and playback of the selected disc starts.

“NO DATA” appears in the display if no track is stored in the program.

If a track stored into the program memory is not in the disc magazine, the track will be skipped.

When the disc magazine contains not a single track stored into the program memory, or when the program information has not been loaded yet, “NO READY” appears.

Erasing the entire program

1 Press (SHIFT), then press (3) (PLAY

MODE) for two seconds.

CD2 DISC

TRACK

47 P108

PLAY MODE

ENTER

“P 1” shows Program 1 is selected.

If you have labeled the disc, the bank edit mode appears. Press (3) (PLAY MODE) to display “P 1” above.

Actual total number:

Sony CDX-C710 (E) 3-856-120-12(2)

 

 

Page 16
Image 16
Sony CDX-C710 manual Creating a program, CD Program Memory CD changer with program memory function