Note

If you try to store another station on the same preset number button, the previously stored station will be erased.

Receiving the memorized stations

1 Press (SOURCE) repeatedly to select the desired band.

2 Press the number button ((1) to (10)) momentarily where the desired station is stored.

If you cannot tune in a preset station

Press either side of (SEEK/AMS) momentarily to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (SHIFT), then press (3) (PLAY MODE) repeatedly until “LOCAL” (local seek mode) is displayed. Then press (4) (n) to select “ON.”

Only the stations with relatively strong signals will be tuned in.

Tip

If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) for two seconds until the desired frequency appears (manual tuning).

If FM stereo reception is poor

— Monaural Mode

1 Press (SHIFT), then press (3) (PLAY

MODE) repeatedly until “MONO” appears.

2 Press (4) (n) repeatedly until “MONO-

ON“ appears.

The sound improves, but becomes monaural (“ST” disappears).

To go back to the normal mode, select “MONO-OFF” in step 2 above.

Changing the displayed items

Each time you press (DSPL), the items alternate between the frequency and time.

Storing the station names

—Station Memo

You can assign a name to each radio station and store it in memory. The name of the station currently tuned in appears in the display. You can store up to eight characters for a station.

Storing the station names

1 Tune in a station whose name you want to store.

2 Press (LIST) for two seconds.

FM1

EQ

￿

3 Enter the characters.

1Press (+) to select the desired

characters.

(A nB nC n··· Z n0 n1 n2 n

··· 9 n+ nn* n/ n\ n> n< n. n_ )

FM1

SUR

EQW

If you press (Ð), the characters appear in the reverse order.

If you want to put a blank space between characters, select “_” (under- bar).

2Press (4) (n) after locating the desired character.

The flashing cursor moves to the next space.

FM1

SUR

EQW

If you press (1) (N), the flashing cursor moves to the left.

3Repeat steps 1 and 2 to enter the entire name.

4 To return to the normal radio reception, press (LIST) for two seconds.

Tip

To erase/correct a name, enter “_” (under-bar) for each character.

continue to next page n

EN

CD Player/Radio

9

Actual total number:

Sony CDX-C710 (E) 3-856-120-12(2)

 

 

Page 9
Image 9
Sony CDX-C710 manual Receiving the memorized stations, Storing the station names