Using the rotary remote

You can use the rotary remote for all operations except menu operations.

Basic operations

By pressing buttons

SOURCE button Each time you press SOURCE, the source changes as follows:

 

TUNER nCD nMD*

 

* When an MD unit is connected.

EN MODE button

Pressing MODE changes the operation as follows:

By rotating the control SEEK/AMS control

•Tuner: FM1 nFM2 nAM

•CD unit: CD1 nCD2 n…

• MD unit: MD1 nMD2 n…

Rotate the control momentarily and release it to:

•Locate the beginning of tracks when CD or MD is selected.

•Automatically tune in a station when FM1, FM2, or AM is selected. When a station is detected, the unit stops searching.

Keep the control rotated to:

•Locate a specific point on a track when CD or MD is selected. Playback at normal speed resumes when you release the control.

•Manually tune in a station when FM1, FM2, or AM is selected. Release the control when the desired station is located.

Tip

If the SEEK/AMS mode is set to “Item sel,” you can select the desired station or disc with SEEK/AMS when the list appears in the display (see page 45).

12Getting started