Sub Menu

Explanation and settings

Clock

Beep

Rotaryremote

SEEK/AMS

Digital out

VC filter

Direct Volume

Select “on” to display the current time in the upper-left corner of the display at all times. If you select “off,” the time is displayed only when the system is turned off. Select “Time Set” to set the clock (see page6).

Specifies whether a beep sounds when an operation button is pressed.

Reverses the rotational direction of the rotary remote for controlling operations. Select “normal” for increasing volume, frequency, track numbers, etc. by rotating the remote clockwise. Select “reverse” for increasing the same parameters by rotating theremotecounterclockwise.

The SEEK/AMS function has two modes: Normal mode — Select “SEEK/AMS” to quickly locate tracks or stations.

Item select mode — When the name list is displayed, select “Item sel” to locate discs or stations using the rotary remote or the front panel control.

Select “ON” to output the digital signals through DIGITAL OUT if optional equipment with digital input is connected. Select “OFF” to cancel the output of digital signals.

Select one of four filter types for adjusting the sound to match your desired sound image, the music source, etc.

Select “on” to output the signal without processing through the volume control circuit for pure high quality sound. In this case, the bass and treble adjustment do not work.

Select “off” to output the signal through the tone control circuit. You can control the bass and treble levels, but the pureness of the original sound will be degraded.

EN

functions Other

Other functions 45