Getting started

Initial settings

Do the following initial settings before you

MENU

operate the unit for the first time, after replacing

 

the car battery, or after resetting the unit.

 

Be sure to make these settings, otherwise the front

 

panel is disabled and you will be unable to insert

 

a CD.

 

Cursor

ENTER

Tip

You can reset all of these initial settings (except the ACC position setting) using the set up menu.

EN

Note

You can specify the ACC position settings only in the initial setting procedure. To change these settings afterwards, press the reset button and repeat the procedure.

1 Press the reset button behind the front panel (see page 2).

The Contrast indication appears.

Press ?or /to adjust the contrast. The contrast is adjustable to 15 levels.

Contrast 8

2 Press ENTER.

The ACC Position indication appears.

Press ?or /to select “yes” or “no.” Select “yes” if your car’s ignition switch has an ACC position; select “no” if your car’s ignition switch has no ACC position.

ACC Position

yes no

3 Press ENTER.

The Digital out indication appears.

Press ?or /to select “on” or “off” depending on your car audio system. Select “on” when an optional equipment with digital input is connected to the unit.

Digital out

on

o ff

4Getting started