Storing only the desired stations

You can manually preset the desired stations on any chosen number button.

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press either side of (SEEK) to tune in the station that you want to store.

4 Press the desired number button ((1) to (6)) on the card remote commander for 2 seconds until “MEM” appears.

The number button indication appears in the display.

Note

If you try to store another station on the same number button, the previously stored station will be erased.

RDS

Overview of RDS

FM stations with Radio Data System (RDS) service send inaudible digital information along with the regular radio programme signal. For example, one of the following will be displayed upon receiving a station with RDS capability.

Displayable items

• Radio band• ClockPreset number • Function
Tuning in a station through a list— List-up1 During radio reception, press (LIST) momentarily.

The frequency or the name assigned to the current station appears in the display.

2 Press either side of (DISC/PRESET) repeatedly until you find the desired station.

If no name is assigned to the selected station, the frequency appears in the display.

3 Press (ENTER) to tune in the desired station.
Station name (Frequency)RDS services

RDS data offers you other conveniences, such as:

•Automatic retuning of a programme, helpful during long-distance drives. — AF t page 15

•Receiving traffic announcements, even when enjoying another programme/source. — TA t page 16

•Selecting stations by the type of programme. — PTY t page 17

•Automatic clock time setting. — CT t page 18

Notes

•Depending on the country or region, not all of the RDS functions are available.

•RDS may not work if the signal strength is too weak or if the station you are tuned to is not transmitting RDS data.

14