Press the ./> control dial.

Storing only desired stations

You can manually preset desired stations.

./> control dial

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press the –mor M+ button to tune in the station that you want to store.4 Press (MENU), then rotate the./> control dial until “PresetEdit” appears.

5

6 Rotate the ./> control dial to select the number that you want to store.7 Press the ./> control dial.The stored station indication appears in the display.8 Press (MENU) twice.

Note

If you try to store another station on the same stored number, the previously stored station will be erased.

Operating with the card remote commander

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Press (SEEK -)or (SEEK +) to tune in the station that you want to store.4 Press the desired number button ((1) to (6)) until “MEM” appears.

Tuning in a station through a list

— List-up

./> control dial

1 During radio reception, press (LIST) momentarily.

The frequency or the name assigned to the current station appears in the display. After 5 seconds, the display returns to the normal playback mode.

2 Rotate the ./> control dial until you find the desired station.

If no name is assigned to the selected station, the frequency appears in the display.

3 Press the ./> control dial to tune in the desired station.

17