Adjusting the equalizer curve

You can store and adjust the equalizer settings for frequency and level.

./> control dial

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press (MENU), then rotate the

./> control dial until “EQ7 Tune” appears.

3 Press the ./> control dial.

4 Press the –mor M+ button to select the desired equalizer curve, then press the ./> control dial. Each time you press the –mor M+ button, the item changes.

5 Select the desired frequency and level.

1Press the –mor M+ button to select the desired frequency.

Each time you press the –mor M+ button, the frequency changes.

62 Hz y 157 Hz y 396 Hz y 1.0 kHz y 2.5 kHz y 6.3 kHz y 16 kHz

2Rotate the ./> control dial to adjust the desired level.

The level is adjustable by 1 dB steps from –10 dB to +10 dB.

To restore the factory-set equalizer curve, press the ./> control dial for 2 seconds.

6 Press the ./> control dial. After the effect setting is complete, the display returns to the normal playback mode.

Adjusting the front and rear volume

VOL control dial

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press the VOL control dial repeatedly until “FAD” appears.

3 Rotate the VOL control dial to adjust the volume of front/rear speakers.

After 3 seconds, the display returns to the normal playback mode.

Adjusting the cut-off frequency for the front/rear speakers

To match the characteristics of the installed speaker system, you can select the cut-off frequency of the speakers.

Level

 

Cut-off frequency

 

 

 

off

 

 

 

 

 

 

Frequency (Hz)

26