Receiving the stored stations

Radio

The unit can store up to 6 stations per band (FM1, FM2, FM3, MW, and LW).Caution

When tuning in stations while driving, use Best Tuning Memory to prevent accidents.

Storing stations automatically— Best Tuning Memory (BTM)

The unit selects the stations with the strongest signals within the selected band, and stores them in the order of their frequency.

./> control dial

1 Press (SOURCE) repeatedly to select the radio.2 Press (MODE) repeatedly to select the band.3 Press (MENU), then rotate the./> control dial until “BTM” appears.

4 Press the ./> control dial.

A beep sounds when the setting is stored.

Notes

If only a few stations can be received due to weak signals, some stored numbers will retain their former settings.

When a number is indicated in the display, the unit starts storing stations from the one currently displayed.

./> control dial

1 Press (SOURCE) repeatedly to select the radio.

2 Press (MODE) repeatedly to select the band.

3 Rotate the ./> control dial until you find the desired station.

Tip

Press the number button ((1) to (6)) on the card remote commander to select the stored station directly.

If preset tuning does not workPress the mor M+ button to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Repeat until the desired station is received.

Tips

If automatic tuning stops too frequently, turn on the Local Seek to limit seek to stations with stronger signals (see “Changing the sound and display settings” on page 24).

If you know the frequency of the station you want to listen to, press and hold the mor M+ button to locate the approximate frequency, then press the

mor M+ button repeatedly to fine adjust to the desired frequency (manual tuning).

If FM stereo reception is poorSelect monaural reception mode(see “Changing the sound and display settings” on page 24).The sound improves, but becomes monaural (“ST” disappears).

Tip

If FM broadcasts are difficult to hear, set DSO to off (page 25).

16