Selecting the spectrum analyzer

The sound signal level is displayed on a spectrum analyzer. You can select a display for ten patterns (A-1 to A-5 or B-1 to B-5), or the automatic display mode where all the patterns appear.

./> control dial

1 Press (SOURCE) to select a source (radio, CD, MD, or AUX).

2 Press (MENU).3 Rotate the ./> control dial until “SA” appears.4 Press the –mor M+ button to select the desired setting.5 Press the ./> control dial.

Labelling a Demo display

— Appearing Characters

You can label a Demo display with up to 64 characters to appear when the unit is turned off. Labels will scroll in the display with Demo set to “on.” (The display remains lit even when the power is off.)

 

./> control

 

dial

1

Press (OFF).

 

CD/MD playback or radio reception stops

 

(the key illumination and display remain on).

2

Press (MENU), then rotate the

28

./> control dial until “Name
Input” appears.

3 Press the ./> control dial.

4 Enter the characters.

1Press (DSPL/PTY) to select the character type.A t a t 0 t A2Rotate the ./> control dial to select the desired character.A y B y C y ... x y y y z y 0 y1 y 2 ... y ! y “ y # ... y * y A

*(blank space)

3Press the M+ button after locating the desired character.

If you press the –mbutton, you can move back to the left.

4Repeat steps 1 to 3 to enter the entire sentence.

5 Press the ./> control dial.

Tips

•Simply overwrite or enter “ ” to correct or erase a sentence.

•To erase all sentences, press the ./> control dial for 2 seconds after step 3.