Refer to the pages listed for details. The corresponding buttons on the card remote commander control the same functions as those on the unit.
aVolume +/– button
To adjust volume.
bATT (attenuate) button
To attenuate the sound. To cancel, press again.
cDSPL (display)/DIM (dimmer) button 4, 8, 12
To change display items (press); change the display brightness (press and hold).
dOPEN shutter, disc slot (located behind the shutter) 5
eDisplay window
fEQ3 (equalizer) button 10
To select an equalizer type (XPLOD,
VOCAL, CLUB, JAZZ, NEW AGE, ROCK, CUSTOM or OFF).
gOFF button
To power off/stop the source.
hSEEK +/– button
Radio:
To tune in stations automatically (press); find a station manually (press and hold).
CD:
To skip tracks (press); skip tracks continuously (press, then press again within about 1 second and hold);
i
(front panel release) button 4 j SOURCE button
To power on/change the source (Radio/CD/
MD*1).
k MODE button 8, 11
To select the radio band (FM/MW/LW)/
select the unit*2.
l SEL (select) button 4, 10, 11, 12
To select items.
m RESET button (located behind the front
panel) 4
n Number buttons
Radio:
To receive stored stations (press); store stations (press and hold).
CD/MD*1:
(1)/(2): GP*3/DISC*2
To skip groups (press); skip groups continuously (press and hold).
(3): REP 8
(4): SHUF 8
oSENS/BTM button 8
To improve weak reception: LOCAL/MONO (press); start the BTM function (press and hold).
pAF (Alternative Frequencies)/TA (Traffic Announcement) button 9
To set AF and TA/TP in RDS.
qPTY (Programme Type)/LIST button 10
To select PTY in RDS; list up.
rReceptor for the card remote commander
The following buttons on the card remote commander have also different buttons/functions from the unit.
s< (.)/, (>) buttons
To control radio/CD, the same as (SEEK) +/– on the unit. (For details of other operations, see “With the card remote commander” on each pages.)
tVOL (volume) +/– button
To adjust volume.
uM (+)/m
To control CD, the same as (1)/(2)
vSCRL button 8
To scroll the display item.
wNumber buttons
To receive stored stations (press); store stations (press and hold).
*1 When an MD changer is connected.
*2 When a CD/MD changer is connected. (CDX- R3350C only)
*3 When an MP3/ATRAC CD is played and a changer is not connected. If the changer is connected, the operation is different, see page 11.
Note
If the unit is turned off and the display disappears, it cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed, or a disc is inserted to activate the unit first.
Tip
For details on how to replace the battery, see “Replacing the lithium battery of the card remote commander” on page 15.
7