Receiving the memorised stations

1 Press (SOURCE) repeatedly to select the tuner.

2 Press (MODE) repeatedly to select the band.

3 Press the number button ((1) to (6)) on which the desired station is stored.

Tip

Press either side of (PRST) to receive the stations in the order they are stored in the memory (Preset Search Function).

If you cannot tune in a preset station

Press either side of (SEEK/AMS) to search for the station (automatic tuning).

Scanning stops when the unit receives a station. Press either side of (SEEK/AMS) repeatedly until the desired station is received.

Note

If the automatic tuning stops too frequently, press (MENU), then press either side of (PRST) repeatedly until “LOCAL” (local seek mode) is displayed. Then press the (+) side of (SEEK/AMS) to select “LOCAL-ON.” Press (ENTER).

Only the stations with relatively strong signals will be tuned in.

Tips

•When you select the “LOCAL-ON” setting,

“L.SEEK” appears while the unit is searching for a station.

•If you know the frequency of the station you want to listen to, press and hold either side of (SEEK/AMS) until the desired frequency appears (manual tuning).

If FM stereo reception is poor

—Monaural Mode

1 During radio reception, press (MENU), then press either side of (PRST) repeatedly until “MONO-OFF” appears.

2 Press the (+) side of (SEEK/AMS) until “MONO-ON” appears.

The sound improves, but becomes monaural (“ST” disappears).

3 Press (ENTER).

To return to normal mode, select “MONO-OFF” in step 2.

In the Motion Display mode, all the items are scrolled in the display one by one in order.

Tip

The Motion Display mode can be turned off. (See “Changing the sound and display settings” on page 22.)

19