Card remote commander
ON/OFFOFF
PBC
MENU PRSTRTN
SEEK | SEEK |
SOURCE
SELECT
SOUND PRST ENTER
DSPL OSD MODE
ATTVOL
Note
A unit turned off by pressing (OFF) for two seconds cannot be operated with the card remote commander unless (SOURCE) on the unit is pressed or a disc is inserted to activate the unit first.
The corresponding buttons of the card remote commander control the same functions as those on this unit.
1PBC ON/OFF button 14
2MENU button
3SOURCE button
4SEEK/AMS (cursor </,) buttons
5SOUND button
6DSPL button
7ATT button 22
8
9OFF button
0RTN button 14
qa PRST (cursor M/m) buttons qs SELECT/ENTER button qd OSD button 23
qf MODE button qg VOL buttons
Replacing the lithium battery
When the battery becomes weak, the range of the card remote commander becomes shorter. Replace the battery with a new CR2025 lithium battery.
x
+ side up
Notes on lithium battery
•Keep the lithium battery out of the reach of children. Should the battery be swallowed, immediately consult a doctor.
•Wipe the battery with a dry cloth to assure a good contact.
•Be sure to observe the correct polarity when installing the battery.
•Do not hold the battery with metallic tweezers, otherwise a
WARNING
Battery may explode if mistreated.
Do not recharge, disassemble, or dispose of in fire.
7