Problem | Cause/Solution |
|
|
No picture. | •Turn on the TV. |
| •Select the video input on the TV so that you can view the |
| pictures from this unit. |
| •The TV is on while driving. |
| t The pictures appear only while the car is parked and the |
| parking brake is set. |
|
|
The picture noise appears. | •Defective or dirty CD. |
| •The colour system setting is incorrect. |
| t Set the colour system to “PAL” or “NTSC” according to |
| the connected TV. |
The menu screen does not appear.
•The Video CD/Super VCD does not feature PBC function.
•The PBC function is set to off.
t Set the PBC function to on (page 14).
The sound loses stereo effect. The sound select is set to
Radio reception
Problem | Cause/Solution |
|
|
Preset tuning is not possible. | •Store the correct frequency in the memory. |
| •The broadcast signal is too weak. |
|
|
The stations cannot be received. | Connect a power aerial control lead (blue) or accessory power |
The sound is hampered by | supply lead (red) to the power supply lead of a car’s aerial |
noises. | booster. (Only when your car has |
| rear/side glass.) |
|
|
Automatic tuning is not | The broadcast signal is too weak. |
possible. | t Use manual tuning. |
|
|
The “ST” indication flashes. | •Tune in the frequency accurately. |
| •The broadcast signal is too weak. |
| t Set to the MONO mode (page 19). |
|
|
No picture. | When the tuner is selected, no signal is output from the VIDEO |
| OUT terminal. |
|
|
If the
28