Sony 4-107-608-11, CECHK01 Adjusting video output settings, 3 Confirm the screen, and then press thebutton, 4 Confirm the settings, select "Yes", and then press the button

Getting started

Setting up the PS3™ system

Adjusting video output settings

Depending on the type of cables and the connectors used, you may need to adjust the PS3™ system's video output settings to display video at HD resolutions ( page 6) on a TV.

Hint

If video is not displayed on the TV, perform the following operations:

•Switch the video input of the TV to match the input connector used to connect to the system.

•Turn off the system, and then turn it on again by touching the power button on the system front for at least fi ve seconds (until the system beeps twice). The video output setting will then be reset to the standard resolution.

1 From the home menu, select (Settings) (Display Settings) "Video Output Settings", and then press the button.

2 Select the input connector ( page 7) in use on the TV, and then press the button.

If you select "AV MULTI / SCART", you must choose the type of output signal on the next screen. In most cases, select "Y Pb/Cb Pr/Cr".

3 Confirm the screen, and then press thebutton.

If you changed the connector in step 2, a screen for confi rming the change will be displayed.

4 Confirm the settings, select "Yes", and then press the button.

If you changed the connector in step 2, a screen for confi rming the settings will be displayed.

US

FR

ES

If you select "HDMI", you will have the option to choose "Automatic" or "Custom" on the next screen. In most cases, select "Automatic", and video output settings will be completed automatically.

13