Sony CFD-910 Location of controls Playing a CD, Listening to the radio, Playing a tape, Recording

Location of controls		Playing a CD
Tape compartment	CD compartment	1 Set FUNCTION to CD.

2 Press 6OPEN/CLOSE down to open the CD compartment and place a CD on the CD compartment.

6 OPEN/CLOSE

With the label side up

3 Close the compartment.

Display window Dial scale

Speaker

			4 Press ^ .	Display
			The player plays all
			the tracks once.
TONE		TUNE
2 (headphones)	FUNCTION			Track		number
VOLUME
OPR/BATT			To	Do this
			Adjust the volume	Turn VOLUME.
			Adjust the tone	Turn TONE.
			Stop playback	Press p.
			Pause playback	Press	^ .
				Press again to resume
				play after pause.
			Go to the next track	Press	+ .
			Go back to the previous track	P r e s s	= .
			Locate a point while listening	Press + (forward) or
			to the sound	= (backward) while
				playing and hold down
				until you find the point.
			Remove the CD	Press 6 OPEN/CLOSE.
			Turn off the player	Set FUNCTION to
				TAPE (CD/RADIO
				OFF).

Listening to the radio

1 Set FUNCTION to FM or AM.

2 Turn TUNE to tune in a radio staton.

If the received FM stereo is too weak, the reception becomes monaural.

To	Do this
Adjust the volume	Turn VOLUME.
Adjust the tone	Turn TONE.
Turn off the radio	Set FUNCTION to
	TAPE (CD/RADIO
	OFF).

To improve broadcast reception

Reorient the antenna for FM. Reorient the player itself for AM.

For FM For AM

Tip

To receive an FM stereo program (only for the models equipped with FM MODE/ISS selector at the rear)

Set the FM MODE/ISS selector at the rear to STEREO. If the FM broadcast is noisy, set the selector to MONO and the radio will play in monaural.

Use TYPE I (normal) tape only.

Playing a tape

1 Set FUNCTION to TAPE (CD/RADIO OFF).

2 Press p6 to open the tape compartment and insert a recorded tape. Close the compartment.

With the side you want to play on facing upward.

3 Press ( .

To	Do this
Adjust the volume	Turn VOLUME.
Adjust the tone	Turn TONE.
Stop playback	Press p6 .
Fast-forward or rewind the	Press ) or 0 for
tape	the side facing
	upward
Pause playback	Press P.
	Press the button again
	to resume play after
	pause.
Eject the cassette.	Press p6.

Use TYPE I (normal) tape only.

Recording

1 Insert a blank tape.

With the side you want to record on facing upward.

2 Select the program source you want to record.

To record from the CD player, set

FUNCTION to CD and insert a CD.

To record from the radio, set FUNCTION to FM or AM and tune in the station you want.

3 Press r (( is depressed automatically.)

To	Press
Stop recording	p 6
Pause recording	P
	Press the button again
	to resume recording
	after pause.

Tips

•Adjusting the volume or the tone will not affect the recording level.

•If the AM program makes a whistling sound after you’ve pressed r in step 3, set the FM MODE/ISS (Interference Suppress Switch) at the rear to the position that most decreases the noise (only for the models equipped with FM MODE/ISS selector at the rear).

•For best results, use the AC power as a power source for recording.

•To erase a recording, proceed as follows:

1Set FUNCTION to TAPE (CD/RADIO OFF).

2Press r.

Notes on cassettes

•Break off the cassette tab from side A or B to prevent accidental recording. If you want to reuse the tape for recording, cover the broken tab with adhesive tape.

Side A

Tab for side A

Tab for side B

•The use of a cassette with more than 90 minutes of play time is not recommended except for long, continuous recording or playback.