Creating your own
programme (Programme Play)
You can arrange the playing order of up to 20 tracks on a CD.
DSPL |
|
ENT MEM | MODE |
Jog dial | u x |
1 Press x.
“Cd” appears in the display.
2 Press MODE until “PGM” appears in the display.
3 Turn the jog dial to select the track you want to programme, and press DSPL•
ENT MEM. Repeat this step.
Programmed track Playing order
4 Press uto start programme play.
On the remote
1Press x.
2Press MODE until “PGM” appears in the display.
3Press the number buttons for the tracks you want to programme in the order you want.
4Press N.
To cancel Programme Play
Press MODE until “PGM” disappears from the display.
To check the order of tracks before play
Press DSPL•ENT MEM.
Every time you press the button, the track number appears in the programmed order.
To change the current programme
Press xonce if the CD is stopped and twice if the CD is playing. The current programme will be erased. Then create a new programme following the programming procedure.
Tips
•You can play the same programme again, since the programme is saved until you open the CD compartment.
•You can record your own programme. After you’ve created the programme, insert a blank tape and press zto start recording.