The AM/MW tuning interval is preset as follows at the factory:
Argentine model: 10 kHz
Other models: 9 kHz
If you need to change the AM/MW tuning interval, do the following:
1Press RADIO BAND•AUTO PRESET until “AM” or “MW” is displayed.
2Press DSPL•ENT MEM for 2 seconds.
3Press RADIO BAND•AUTO PRESET for 2 seconds.
“AM 9” “MW 9” or “AM 10” “MW 10” flashes.
4Turn the jog dial to select “AM 9” “MW 9” for 9 kHz interval or “AM 10” “MW 10” for 10 kHz interval.
5Press DSPL•ENT MEM.
After changing the tuning interval, you need to reset your preset AM/MW radio stations.
3Inserting batteries into the remote
Replacing batteries
With normal use, the batteries should last for about six months. When the remote no longer operates the player, replace all the batteries with new ones.
4Using the player on batteries
Insert six R14 (size C) batteries (not supplied) into the battery compartment. To use the player on batteries, disconnect the mains lead from the player.
Replacing batteries
Replace the batteries when the OPR/BATT indicator dims or when the player stops operating. Replace all the batteries with new ones.
Notes
•Before you replace the batteries, be sure to take out the CD from the player.
•When you operate the player on the batteries, you cannot turn on the player with remote.
Tip
When you operate the player on batteries, replace the