The Timer
Setting the clock
“–
MENU | DSPL |
ALARM | Jog dial ENT MEM |
Before you set the clock, connect the power source (see page 24).
1 Press MENU•ALARM until “CLOCK” appears in the display, then press
DSPL•ENT MEM. The hour digit flashes.
2 Turn the jog dial to set the current hour. Then press DSPL•ENT MEM.
The minute digits flash. Set the minutes by turning the jog dial until the correct minute is displayed.
3 Press DSPL•ENT MEM.
The clock starts from 00 seconds.
Tip
The time display system: