The Timer

Setting the clock

“– –:– –” indication appears in the display until you set the clock.

CLOCK/SLEEP/TIMER

ENTER

Jog dial

Before you set the clock, connect the power source (see page 23).

1 Hold down CLOCK/SLEEP/TIMER until “CLOCK” appears in the display. The hour digit flashes.

2 Turn the jog dial to set the current hour. Then press ENTER.

The minute digits flash. Set the minutes by turning the jog dial until the correct minute is displayed.

3 Press ENTER.

The clock starts from 00 seconds.

Tip

The time display system:

CFD-E95: 12-hour system

CFD-E95L: 24-hour system

Timer The

19GB