Connecting optional components (continued)

Listening to TV, VCR and

MiniDisc player/recorder

TV, VCR, MiniDisc

Rear panel of

player/recorder,

etc.

 

this player

to lineAudio

 

output

 

connecting

 

jack

 

cable*(not

 

 

 

 

supplied)to LINE IN

 

 

 

 

jack

*For MiniDisc recorder: a cable with a stereo- mini plug on both ends.

For TV, VCR: a cable with a stereo-mini plug on one end and two phono plugs on the other end.

1 Open the cover of the MD LINK jacks of this player and connect the LINE IN jack with the line output jack of the MiniDisc player or other component using the audio connecting cable (not supplied) .

2 Turn on the power of this player and the connected component.

3 Press LINE and start playing sound on the connected component.

The sound from the connected component is output from the speakers.

Note

Connect the cords firmly to avoid any malfunction.

Tip

You can record the sound of the connected component. Insert a blank tape into the tape compartment, and press z (page 11).

Changing the backlight colour in the display

The backlight in the display lights in three (CFD-E95) or four (CFD-E95L) different colours. You can change the colour for each music source (CD, RADIO, TAPE or LINE).

COLOUR (or COLOR)

1 Play the music source (CD, RADIO, TAPE or LINE) you want to change the backlight colour.

2 Press COLOUR (or COLOR) until the display lights in the desired colour.

Changing the colour of the backlight at random

Press COLOUR (or COLOR) for about 2 seconds. The colour of the backlight changes automatically. To return the colour to the one set before you pressed the button, press it again for about 2 seconds.

26GB