To use the player before a timer playback starts

Just turn on the player, and then you can use it.

If you turn off the player before the preset time, timer playback will start at the preset time.

In case of the radio, however, if you listen to the station which is different from the one you tuned in step 1 on page 20, you will hear that station at the preset time. Make sure to tune in the station you want to listen to before you turn off the player.

To stop play

Press OPERATE (or POWER) to turn off the power.

Notes

When you press STANDBY in step 7 on page 20, make sure that n or z button of the tape player is not pressed.

When you press n or z button of the tape player in the timer mode:

If the tape length of one side is longer than the set time, the player will be turned off at the end of the tape, not at the set time.

Tips

To exit the standby mode, press STANDBY to

make disappear from the display.

The preset settings remain until you reset them.

Falling asleep to music

You can set the player to turn off automatically after 10, 20, 30, 60, 90, and 120 minutes, allowing you to fall asleep while listening to music.

CLOCK/SLEEP/TIMER

ENTER

Jog dial

1 Play the music source you want.

2 Press CLOCK/SLEEP/TIMER until “SLEEP” appears in the display, and press ENTER.

3 Turn the jog dial to select the minutes until the player goes off automatically. Each time you turn the jog dial, the indication changes as follows:

“60” t “90” t “120” t “OFF” t “10” t “20” t “30.”

Timer The

continued

21GB