Waking up to music

You can wake up to music or a radio programme at a preset time. Make sure you have set the clock (“Setting the clock” on page 19).

CLOCK/SLEEP/TIMER

STANDBY

ENTER

Jog dial

Before you begin, make sure the (clock) indication is not lit in the display. If it is lit, press STANDBY.

1 Prepare the music source you want to play.

 

To play

Do this

 

the radio

Tune in a station.

 

 

 

 

a CD

Insert a CD.

 

 

 

2 Press CLOCK/SLEEP/TIMER until “TIMER” appears in the display, then press ENTER.

The (clock) indication flashes.

3 Set the timer to the hour you want the music to start by turning the jog dial, then press ENTER.

Set the minutes, then press ENTER.

4 Set the timer to the hour and the minutes you want the music to go off. (Do as step 3.)

5 Select the music source (“Cd” or “RAdIO”) by turning the jog dial, then press ENTER.

6 Turn the jog dial to set the volume, then press ENTER.

7 Press STANDBY.

The indication lights up and the power goes off.

At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player will enter into the standby mode.

To check/change when the playback will start

Press CLOCK/SLEEP/TIMER until “TIMER” appears in the display, then press ENTER. Each time you press ENTER, a stored setting is displayed in the set order. To change the setting, display the setting you want to change and re-enter it.

20GB