
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
With
Other Specifications
CD player section
System
Compact disc digital audio system Laser diode properties
Material: GaAlAs
Wave length: 780 nm
Emission duration: Continuous
Laser output: Less than 44.6 µW
(This output is the value measured at a distance of about 200 mm from the objective lens surface on the optical
Spindle speed
200 r/min (rpm) to 500 r/min (rpm) (CLV) Number of channels
2 Frequency response
20 - 20,000 Hz
Below measurable limit
Radio section
Frequency range
FM: 87.6 - 108 MHz
AM: 530 - 1,605 kHz (Australian model) 530 - 1,710 kHz (Other models)
Aerials
FM: Telescopic aerial
AM:
Cassette-corder section
Recording system
Approx. 115 s (sec.) with Sony cassette
TYPE I (normal): 70 - 10,000 Hz
General
Speaker
Full range: 10 cm dia., 3.2 ohms, cone type (2)
Tweeter: 2cm (2) Outputs
Headphones jack (stereo minijack)
For 16 - 68 ohms impedance headphones Power output (excluding U.S. model)
2 .3 W + 2.3 W (3.2 ohms at 10 % harmonic distortion in DC operation)
Power requirements
For CD radio
230 V AC, 50 Hz (Australian model)
120 V AC, 60 Hz (Other models)
9 V DC, 6 size D (R20) batteries
For remote controller
3 V DC, 2 size AA (R6) batteries Power consumption
AC 20 W
Battery life
For CD radio
FM recording
Sony R20P: approx. 13.5 h
Sony alkaline LR20: approx. 19 h
Tape playback
Sony R20P: approx. 7.5 h
Sony alkaline LR20: approx. 12 h
CD playback
Sony R20P: approx. 2.5 h
Sony alkaline LR20: approx. 4.5 h
Dimensions
Approx. 520 × 253 × 256 mm (w/h/d)
(20 1⁄2 × 10 × 10 1⁄8 inches) (incl. projecting parts) Mass
Approx. 5.7 kg (12 lb. 9 oz) (incl. batteries) Supplied accessory
AC power cord (1)
Remote controller (1)
Design and specifications are subject to change without notice.
Optional accessories
Sony MDR headphones series
Additional Information |
| 25 |
| ||
|
|
|