Sony CMR-PC1 USB Required Settings Before You Can Use Your Camera, 6 GB, “SONY USB CAMERA Viewer”, Installing the Drivers, “Camera Setting Utility” and

Required Settings Before You Can Use Your Camera

Using the supplied install disc, you must first install the necessary drivers and software on the computer.

Installing the Drivers, “Camera Setting Utility” and

“SONY USB CAMERA Viewer”

This section describes the procedures for installing the drivers required to connect your camera and the “Camera Setting Utility” software used for setting your camera and the “SONY USB CAMERA Viewer” software used for testing any of the camera’s functions.

Your camera is designed specially for use with computers with preinstalled versions of Windows 98, Windows 98 SE, Windows 2000 Professional or Windows Millennium Edition. It cannot be used with other computers.

1

2

3

4

Turn on the computer without the camera being connected.

Insert the CD-ROM into the CD-ROM drive.

Click the [Start] button, and then select [Run] to continue.

Type “d:\Drivers\USBCam\setup.exe”, where “d:\” is the drive

letter of your CD-ROM drive; then click [OK] to start the “SONY USB CAMERA Drivers and Viewer” installation program.

6 GB