Creating your own program
— Program Play
You can make a program of up to 25 steps. You can synchro record the programmed tracks onto a cassette tape (page 15).
1 Press CD (or FUNCTION repeatedly) to switch the function to CD.
2 Press PLAY MODE in stop mode repeatedly until “PROGRAM” appears.
3 Press ./> repeatedly until the desired track number appears.
When programing an MP3, press ALBUM +/– repeatedly to select the album, then press ./> repeatedly until the desired track number appears.
Selected track number Total playing time
4 Press ENTER (or PLAY MODE).
The track is programmed.
The program step number appears, followed by the last programmed track number.
5 To program additional tracks, repeat steps 3 and 4.
6 Press N (or CD NX on the unit).
Program Play starts.
Other operations
To | Do this |
Cancel Program Play | Press PLAY MODE in stop |
| mode repeatedly until both |
| “PROGRAM” and |
| “SHUFFLE” disappear. |
|
|
Erase the program | Press CLEAR in step 4. |
| Each time you press the |
| button, a track is cleared |
| from the end of the |
| program. |
|
|
Add a track to the end of | Perform steps 3 and 4 in |
the program | stop mode. |
|
|
Tips
•The program you made remains after Program Play finishes. To play the same program again, press N. However, the program is cleared when you eject the disc.
•“–