Tuner
Presetting radio stations
You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number.
Automatic tuning presetYou can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.
1
2
3 Press +/– (or turn TUNING +/– on the unit).
The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo program only) appear.
If “TUNED” does not appear and the scanning does not stopSet the frequency of the desired radio station as described in steps 2 and 3 of “Manual tuning preset” (page 11).
4 Press TUNER MEMORY.The preset number flashes. Perform steps 5 and 6 while the preset number flashes.
Preset number
5 Press +/– (or turn TUNING +/– on the unit) repeatedly to select the desired preset number.
6 Press ENTER.
7 Repeat steps 3 through 6 to preset other stations.Tip |
| |
Tuner | ||
Press TUNING MODE to stop scanning. | ||
|
You can manually tune in and store the radio frequency of the desired stations.
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.2 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.
3 Press +/– (or turn TUNING +/– on the unit) repeatedly to tune in the desired station.
4
5
6
7 Repeat steps 3 through 6 to preset other stations.Other operations
To | Do this |
Tune in a station | Follow the procedure described |
with a weak signal | in “Manual tuning preset” |
| (page 11). |
|
|
Set another station | After step 4, press +/– (or turn |
to the existing | TUNING +/– on the unit) |
preset number | repeatedly to select the preset |
| number you want to store the |
| station. |
|
|