Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Use buttons on the remote for the operation.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 8).
1 Press TUNER BAND repeatedly to select FM or AM.
2 Press TUNING MODE repeatedly until
the preset number appears in the display.
3 Press TUNING +/– repeatedly to select the desired preset station.
Listening to non-preset radio station
— Manual Tuning
1 Press TUNER BAND repeatedly to select FM or AM.
2 Press TUNING MODE repeatedly until “AUTO” and the preset number disappear from the display.
3 Press TUNING +/– repeatedly to tune in the desired station.
Tips
•To improve broadcast reception, adjust the supplied antennas, or connect a commercially available external antenna.
•When an FM stereo program has static noise, press FM MODE until “MONO” appears. There will be no stereo effect, but the reception will improve.
•In step 2, press TUNING MODE repeatedly until “AUTO” and the frequency appear in the display, then press TUNING
10GB
Sound Adjustment
Adjusting the sound
You can adjust the bass and treble to enjoy more powerful sound.
Use buttons on the remote for the operation.
Generating a more dynamic sound (Dynamic Sound Generator)
Press DSG.
To cancel the DSG, press DSG again.
Adjusting the bass and treble
1 Press BASS to adjust the bass, or TREBLE to adjust the treble.
2 Press EQ +/– repeatedly to adjust the level.
Tip
To cancel the bass or treble adjustment, press CENTER in step 2.
Adjusting the balance
You can adjust the
1 Press BALANCE.
2 Press EQ +/– repeatedly to adjust the balance.
Tip
To cancel the balance adjustment, press CENTER in step 2.