Optional Components

Hooking up optional components

To enhance your system, you can connect optional components. Refer to the operating instructions provided with each component.

To the audio input

 

From the audio

 

 

 

 

jacks of an optional

 

output jacks of an

 

 

analog component

 

optional analog

 

 

 

 

component

 

 

 

 

 

 

 

 

Optional analog component

 

Optional analog component

 

 

Headphones

 

 

 

 

 

 

 

APC/MD/TAPE OUT jack

Use an audio cord (not supplied) to connect an optional component (MD deck, etc.) to this jack. You can then output sound to that component from this system.

BPC/MD/TAPE IN jack

Use an audio cord (not supplied) to connect an optional component (MD deck, etc.) to this jack. You can then listen to the sound from that component through this system.

CPHONES jack

Connect headphones to this jack.

Listening to audio from a connected component

1Connect the audio cord.

See “Hooking up optional components” on page 14.

2Press FUNCTION repeatedly until “PC” (or “MD” or “TAPE”) appears.

3While pressing and holding x on the unit, press ?/1 on the unit repeatedly until the desired sound source (“PC”, “MD” or “TAPE”) appears.

Start playing the connected component.

Recording on a connected componentMaking an analog recording

1 Connect the audio cord.

2 Start recording.

Refer to the operating instructions provided with connected component.

14GB