Sony CMT-CQ1 Presetting radio stations, Tuner, 3 Press TUNING +/–, 4 Press TUNER MEMORY, Automatic tuning preset, 1 Press TUNER BAND repeatedly to select FM or AM

Other operations

To	Do this
Check the program	Press ./>repeatedly
order	during program play.
Cancel Program	Press PLAY MODE on the
Play	remote in stop mode repeatedly
	until both “PGM” and “SHUF”
	disappear.
Add a track to the	Perform steps 1 – 4 in stop mode.
end of the program
Erase the program	Press CLEAR on the remote in
	stop mode. Each time you press
	the button, a track is cleared from
	the end of the program.

Tips

•The program you made remains after Program Play finishes. To play the same program again, press CD N. However, the program is cleared when you open the disc tray.

•If you select “CD AL” in step 3, you can select all tracks on the disc at once.

Tuner

Presetting radio stations

You can preset up to 20 FM stations and 10 AM stations. You can then tune in any of those stations simply by selecting the corresponding preset number.

Use buttons on the remote for the operation.

Automatic tuning preset

You can automatically tune in all of the stations that can be received in your area and then store the radio frequency of the desired stations.

1 Press TUNER BAND repeatedly to select FM or AM.

2 Press TUNING MODE repeatedly until “AUTO” and the frequency appear in the display.

3 Press TUNING +/–.

The frequency changes as the system scans for a station. Scanning stops automatically when a station is tuned in. At that time, “TUNED” and “STEREO” (for stereo program only) appear.

If “TUNED” does not appear and the scanning does not stop

Set the frequency of the desired radio station as described in steps 2 through 6 of “Manual tuning preset” (page 9).

4 Press TUNER MEMORY.

The preset number flashes. The stations are stored from preset number 1.

Preset number

8GB