Jack type B

Extend the FM lead

 

antenna horizontally.

AM loop antenna

ANT

 

 

FM Ω

 

 

75

 

 

COAXIAL

 

 

AM

ANT

 

 

 

3Connect the power cord to a wall outlet.

If the supplied adaptor on the plug does not fit your wall outlet, detach it from the plug (only for models equipped with the adaptor).

To turn on the system, press [/ 1 (power).

To attach the speaker pads

Attach the supplied speaker pads to the bottom of the speakers to stabilize the speakers and prevent them from slipping.

Inserting two size AAA (R03) batteries into the remote

Tip

When the remote no longer operates the system, replace both batteries with new ones.

Note

If you do not use the remote for a long period of time, remove the batteries to avoid possible damage from battery leakage.

Setting the time

1 Turn on the system.2 Press CLOCK/TIMER on the remote.

When you set the clock for the first time, go to step 5.

3 Press CLOCK/TIMER on the remote repeatedly until “SET CLK” appears in the display.

4 Press TUNER MEM/ENTER on the remote.5 Press TUNING/CLOCK/TIMER + or – on the remote repeatedly to set the hour.6 Press TUNER MEM/ENTER on the remote.7 Press TUNING/CLOCK/TIMER + or – on the remote repeatedly to set the minute.8 Press TUNER MEM/ENTER on the remote.To reset the system clock

Start over from step 1.

Note

The clock settings are canceled when you disconnect the power cord or if a power failure occurs.

Started Getting

7