Tape
Loading a tape
1 Press TAPE.2 Press Z PUSH OPEN/CLOSE.3 Insert a tape in deck with the side youwant to play/record facing forward.Insert with the side you want to play/
record facing forward.
Playing a tape
You can use TYPE I (normal), TYPE II (CrO2) or TYPE IV (metal) tape.
1
2
3 Press RDS/DIR (PLAY MODE/RDS/DIR on the rmote) repeatedly to select g to play one side, hto play both sides, or j* to play both sides repeatedly.
*The tape automatically stops after playing back five times.
4 Press nN.Press nN again to play the reverse side.To | Press |
Stop play | x |
|
|
Pause | X |
| Press again to resume play. |
|
|
With the tape stopped, press | |
| . m/M > |
|
|
Remove the cassette | Z PUSH OPEN/CLOSE |
|
|
During playback, press . m or M >.
The tape is wound or rewound to the beginning of the next or current track, and play will start automatically. The search direction, “+” (forward) or
* AMS (Automatic Music Sensor)
Tip
You can change the display into the clock display (for five seconds) by pressing DISPLAY.
Note
The AMS function may not operate correctly under the following circumstances:
–When the unrecorded space between tracks is less than 4 seconds long.
–If completely different information is recorded on the left and right channels.
–When there are continuous sections of extremely low level or low frequency sound (like those of a baritone sax).
–When the system is placed near a television. (In this case, we recommend moving the system farther away from the television or turning off the television.)
13