Recording to a tape
–– CD Synchro Recording/Recording Manually
You can record from a CD or radio. You can use TYPE I (normal) tape.
Steps | Recording from a CD | Recording from the radio |
| (CD Synchro Recording) |
|
|
|
|
1 | Load a blank tape. |
|
|
|
|
2 | Press CD. | Press TUNER (TUNER/BAND on the |
|
| remote). |
|
|
|
3 | Load the CD you want to record. | Tune in the station you want to record. |
|
|
|
4 | Press z. |
|
| The deck stands by for recording. |
|
|
| |
5 | Press nN, if you want to switch the direction. | |
|
| |
6 | Press RDS/DIR (PLAY MODE/RDS/DIR on the remote) repeatedly to select g | |
| to record on one side, hto record on both sides. | |
|
|
|
7 | Press z again. |
|
| Recording starts. |
|
|
|
|
To stop recording
Press x.
Tips
•For recording from a CD to a tape manually, you can press . m or M > to select tracks during recording pause mode (after step 4 and before step 6).
•When you record on both sides, be sure to start from the front side. If you start from the reverse side, recording stops at the end of the reverse side.
•When an AM program is noisy, set ISS to select the position that most decreases the noise.
14