Programing the CD tracks
— Program Play
You can make a program of up to 25 tracks in the order you want them to be played.
1 Press CD, then place a CD.
2 Press PLAY MODE repeatedly in stop mode until “ PROGRAM” appears in the display.
3 Press DISC 1 – 3 to select a CD.
4 Turn ./ >clockwise or counterclockwise (or press .or > on the remote) until the desired track appears in the display.
To | Do this |
Cancel Program | Press PLAY MODE until |
Play | “PROGRAM” or “SHUFFLE” |
| disappears from the display. |
|
|
Add a track to | Do steps 3 to 5 with Program Play |
the end of the | stopped. |
program |
|
|
|
Erase the entire | Press PGM CLEAR, when Program |
program | Play is in stop mode. |
|
|
Tip
The program you made remains in the system’s memory even after it has been played back. Press CD, then press nNto play the same program again.
Note
If you open the disc tray, the program you made will be erased.
CD
Disc tray | Track | Programed |
number | number | step number |
5 Press ENTER.
The track is programed.
6 To program additional tracks, repeat steps 3 to 5.
7 Press nN.
Program Play starts.
9GB