Start over from step 1.
Change the preset station
Start over from step 1.
Change the preset number
Follow the procedure described in “ Setting presets through manual tuning” .
Tune in a station with a weak signal
Do this
Other Operations
To
The station is stored.
Press ENTER.
5
6 Repeat steps 1 to 5 to store other stations.
Press TUNER MEM (TUNER MEMORY on the remote).
Press PRESET (PRESET/CLOCK/TIMER on the remote) + or –repeatedly to select the desired preset number.
-
Preset number
3
4
Turn TUNING +/–(or press TUNING + or TUNING –on the remote) repeatedly to tune in the desired station.
2
Press TUNER (TUNER/BAND on the remote) repeatedly to select “ FM” or “ AM” .
1
The station is stored.
6 Repeat steps 1 to 5 to store other stations.
Setting presets through manual tuning
Press ENTER.
5
Tuner
Presetting radio stations
You can preset up to 30 stations for FM and AM. You can then tune in any of those stations simply by selecting the corresponding preset number.
There are two ways to store the station presets.
To | Method |
Automatically tune in all of | Automatic Tuning |
the stations that can be | Preset |
received in your area and then | |
store them manually | |
| |
Manually tune in and store the | Manual Tuning |
radio frequency of your | Preset |
favourite stations | |
| |
Setting presets through automatic tuning1 Press TUNER (TUNER/BAND on the remote) repeatedly to select “ FM” or “ AM” .2 Turn and hold TUNING +/–(or press and hold TUNING + or TUNING –on the remote) until the frequency indication starts to change, then release it.
Scanning stops automatically when the system tunes in a station. “ STEREO” (for a stereo program) appears.
If the scanning doesn’t stopSet the frequency of the desired radio station as described in steps 2 through 5 of “ Setting presets through manual tuning” .
3 Press TUNER MEM (TUNER MEMORY on the remote).The preset number starts flashing.
4 Press PRESET (PRESET/CLOCK/TIMER on the remote) + or –repeatedly to select the desired preset number.
Preset number
10GB