Optional Components

Hooking up optional components

You can connect a digital or an analogue component to this system.

Optional analogue component

From the audio output jacks of an analogue component

Optional digital component

To the digital input jack of a digital component

AMD IN jacks

Use audio cords (not supplied) to connect an optional component (such as an MD player) to these jacks. You can then record or listen to analogue audio from that component through this system.

BOPTICAL DIGITAL OUT jack

Use a digital cable (square, not supplied) to connect an optional digital component (such as an MD recorder) to this jack. You can then make a digital recording from this system to that digital component.

Recording a CD on a connected digital component

1 Connect the digital cable.

See “ Hooking up optional components” above.

2 Start recording.

Refer to the operating instructions provided with the connected component.

Listening to audio from a

connected component

1 Connect the audio cords.

See “ Hooking up optional components” above.

2 Press MD to switch the function to MD.

Start playing the connected component.

Recording audio from a

connected component

1 Connect the audio cords.

See “ Hooking up optional components” above.

2 Start recording manually.

See “ Recording to a tape” on page 14.

18GB