Recording to a tape

CD Synchro Recording/Recording Manually

You can record from a CD or radio (or connected components). You can use TYPE I (normal) tape.

Steps
Recording from a CD

 

Recording from the radio

 

(CD Synchro Recording)

 

(or a connected component) manually

 

 

 

 

 

1

Load a blank tape.

 

 

 

 

 

 

 

 

2

Press DISC 1 –3 Z.

 

Press TUNER (TUNER/BAND on the

 

 

 

 

remote) or MD to select the desired

 

 

 

 

source to record.

 

 

 

 

3

Load the CD you want to record.

 

Tune in the radio station (or load

 

 

 

 

another audio source) you want to

 

 

 

 

record.

 

 

 

 

 

4

Press z REC PAUSE/START.

 

 

 

The deck stands by for recording.

 

 

 

When you want to record on the reverse side, press nN.

 

 

5

Press FM MODE/DIR (REPEAT/DIR on the remote) repeatedly to select gto

 

record on one side, hto record on both sides.

 

 

 

 

6

Press z REC PAUSE/START again.

 

Press z REC PAUSE/START again, and

 

Recording starts.

 

then start playing the desired source.

 

 

 

 

 

To stop recording

Press x.

Tips

When you record on both sides, be sure to start from the top side. If you start from the bottom side, recording stops at the end of the bottom side.

For recording from the radio:

If noise is heard while recording from the radio, move the respective antenna to reduce the noise.

Note

To erase a recording, remove all the CDs, press CD, and then press z REC PAUSE/START twice.

14GB