To change the AM tuning interval (Except for European model)
The AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the AM tuning interval, tune into any AM station first, then turn off the power by pressing ?/1. While holding TUNING +, press ?/1.
When you change the interval, all AM preset stations are erased. To reset the interval, repeat the above procedure.
To improve tuner reception
When tuner reception is poor, set CD player power off by the CD power manage function. CD power is factory set to on.
1Press FUNCTION repeatedly to switch the function to CD.
2Press ?/1 to turn off the system.
3Press ?/1 on the unit while holding x (CD stop) on the unit.
“CD POWER” and “OFF” appear.
To set the CD power on
Repeat the procedure above, and “CD POWER” and “ON” appear.
Notes
•When “CD POWER” and “OFF” are selected, CD access time is increased.
•In the Power Saving Mode, switching the CD power on or off using the CD power manage function is not possible.
Tips
•The preset stations are retained for about half a day even if you disconnect the power cord or if a power failure occurs.
•To improve the reception, adjust the supplied antennas or connect an external antenna.
Listening to the radio
You can listen to a radio station either by selecting a preset station, or by manually tuning in the station.
Listening to a preset station
— Preset Tuning
Preset radio stations in the tuner’s memory first (see “Presetting radio stations” on page 12).
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until “PRESET” appears in the display.
3 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset station.
Listening to non-preset radio station
— Manual Tuning
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.
2 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.
3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.
continued