Slide and remove the battery compartment lid , and insert the two supplied R6 (size AA) batteries, side first, matching the polarities shown below.
Notes
•With normal use, the batteries should last for about six months.
•Do not mix an old battery with a new one or mix different types of batteries.
•If you do not use the remote for a long period of time, remove the batteries to avoid damage from battery leakage and corrosion.
Setting the clock
1 Press /(power) to turn on the system.
2 Press CLOCK/TIMER SET .
If the current mode appears on the display, press /repeatedly to select “CLOCK SET?” and then press ENTER .
3 Press / repeatedly to set the hour, and then press ENTER .
4 Use the same procedure to set the minutes.
When you turn off the system after setting the clock, the clock display appears instead of the demonstration display.
The clock settings are lost when you disconnect the power cord or if a power failure occurs.
10GB