Using the Timers

The system offers two timer functions. If you use the Play Timer with the Sleep Timer, the Sleep Timer has priority.

Sleep Timer:

You can fall asleep to music. This function works even if the clock is not set.

Press SLEEP repeatedly. If you select “AUTO,” the system automatically turns off after the current disc stops or in 100 minutes.

Play Timer:

You can wake up to CD, tuner or optional USB device at a preset time.

Use buttons on the remote to control the Play Timer. Make sure you have set the clock.

1 Prepare the sound source.

Prepare the sound source, and then press VOLUME +/– to adjust the volume.

To start from a specific CD track, “ATRAC” file or MP3 file of a disc, create your own program (page 21).

2 Press CLOCK/TIMER SET .

3 Press /repeatedly to select “PLAY SET?,” and then press ENTER .

“ON” appears, and the hour indication flashes.

4 Set the time to start playing.

Press /repeatedly to set the hour, and then press ENTER . The minute indication flashes. Use the procedure above to set the minutes.

5 Use the same procedure as in step 4 to set the time to stop playing.

6 Select the sound source.

Press /repeatedly until the desired sound source appears, and then press ENTER . The display shows the timer settings.

7 Press /to turn off the system.

The system turns on 15 seconds before the preset time. If the system is on at the preset time, the Play Timer will not play.

To activate or check the timer again

Press CLOCK/TIMER SELECT , press /repeatedly until “PLAY SELECT?” appears, and then press ENTER .

To cancel the timer

Repeat the same procedure as above until “TIMER OFF” appears, and then press ENTER

.

To change the setting

Start over from step 1.

Note

You cannot perform Program Play of the files on an USB device using the Play Timer.

Tip

The Play Timer setting remains as long as the setting is not canceled manually.

Operations Other

23GB