4 Enter the passcode.
Passcode entry may be required depending on the type of BLUETOOTH device.
For details about the operations of the BLUETOOTH device, refer to the operation manual supplied with your BLUETOOTH device.
Enter the passcode at the system as follows:
“PIN?” and a countdown appear.
Press /and /to enter the same passcode that was entered at the BLUETOOTH device, and then press ENTER .
Once pairing is completed and the connection is established, the system display changes as follows:
“Connect” Name of the BLUETOOTH device
To cancel passcode entry partwayPress .
Notes
•“Passcode” may be called “Passkey,” “PIN code,” “PIN number” or “Password,” etc. depending on the device.
•This system only supports numerical passcodes up to 13 digits.
•The pairing standby status of the system is cancelled after about 30 seconds. If pairing is not successful, redo the procedure from step 1.
•While connected to a BLUETOOTH device, this system cannot be detected and a connection cannot be established from another BLUETOOTH device.
1Press BLUETOOTH on the unit.
When the system is connected with a BLUETOOTH device (when the BLUETOOTH device name appears in the system display), turn off the system or change the function to cancel the connection.
2Press CLEAR .
“Delete?” appears.
3Press ENTER .
“Complete!” appears and all the pairing information is erased.
Note
In order to connect with a BLUETOOTH device after performing this operation, you must enter the passcode again.
Operations Basic
Continued
15GB