Other Operations

Creating your own program

(Program Play)

Use buttons on the remote to create your own program.

1 Select the desired function.

CD

Press CD to select the CD function.

USB

Press USB to select the USB function.

2 Press PLAY MODE repeatedly until “PGM” appears while the system is stopped.

3 Press /repeatedly until the desired track or file number appears.

When programming files, press +/– repeatedly to select the desired folder, and then select the desired file.

Example: When programming tracks on a CD

Selected track or file number

Total playing time of program

 

(including selected track or file)

4 Press ENTER to add the track or file to the program.

CD

“– –.– –” appears when the total program time exceeds 100 minutes for a CD, or when you select a CD track whose number is 21 or over, or when you select an “ATRAC” file or MP3 file.

USB

The total program time cannot be displayed, so “– –.– –” appears.

5 Repeat steps 3 through 4 to program additional tracks or files, up to a total of 25 tracks or files.

6 To play your program of tracks or files, press .

The program remains available until you remove the disc or USB device. When using an USB device, the program disappears when the system is turned off. To play the same program again, press .

To cancel Program Play

Press PLAY MODE repeatedly until “PGM” disappears while the system is stopped.

To delete the last track or file of the program

Press CLEAR while the system is stopped.

Operations Other

21GB