Tips
•If you press TUNER BAND when the power is off, the system automatically turns on and tunes in the station last received (One Touch Play).
•To switch to the radio while listening to another source, press TUNER BAND (Automatic Source Selection).
•If there is static during an FM broadcast, press STEREO/MONO on the remote until “MONO” appears. After “MONO” scrolls across the display, the frequency will appear. The broadcast will no longer be in stereo, but the reception will improve. Press this button again to restore the broadcast to stereo.
•To improve the reception, adjust the supplied antennas or connect an external antenna (see “Connecting external antennas” on page 11).
Recording from the radio
Do the procedure below to tune in a preset station (see page 16) and record from the radio to a tape. Both Type I (normal) and Type II (CrO2) tapes can be used.
To turn on the system, press ?/1.
|
| TAPE x | ||
?/1 | TAPE |
|
| |
(Power) 8 | 5 | 6 | ||
nN | ||||
|
| Z |
| |
|
| bB | x | |
|
| m | M | |
|
| X | z | |
|
|
| + | |
|
|
| – | |
|
| Z |
| |
|
| u | x | |
|
| . | > | |
|
| m | M | |
1 2 3 4
+ +
– –
O
DOLBY NR
7 | N | X | x |
| nN . > | z | |
|
|
| |
| m | M | y |
|
| # | + |
|
| 2 | – |
continued
Operations Basic
17