Sony CMT-VP11 Speakers, VIDEO CD/CD Player, Tape Deck

The remote does not work.

•There is an obstacle between the remote and the unit.

•You are not pointing the remote in the direction of the system’s sensor.

•The batteries in the remote have run down. Replace the batteries.

•Make sure that the batteries are inserted correctly.

Sound comes from only one channel, or the left and right volumes are unbalanced.

•Check the speaker connections and placement.

There is no picture.

•Check that the system is connected securely.

•Make sure that you have operated the TV correctly.

•Make sure that you have set the

SYSTEM SELECT to proper setting for the color system of your TV.

•Press CD to switch to the VIDEO CD/CD function.

The VIDEO CD/CD will not play.

•The disc is dirty.

•The surface of the disc is scratched. Replace the disc.

•The disc is inserted with the label side down.

•Condensation has built up in the system. Remove the disc and leave the system turned on for about an hour until the moisture evaporates.

Play does not start from the first track.

•The player is in Program or Shuffle Play. Press PLAY MODE repeatedly until “PGM” and “SHUFFLE” disappear.

Recording cannot be done.

•There is no tape in the cassette holder.

•The record protect tab has been removed from the cassette (see page 37).

•The tape has come to the end.

The tape does not record or play, or there is a decrease in sound level.

•The heads are dirty. Clean them (see page 38).

•The record/playback heads are magnetized. Demagnetize them (see page 38).

The tape does not erase completely.

•The record/playback heads are magnetized. Demagnetize them (see page 38).

There is excessive wow or flutter, or the sound drops out.

•The capstans or pinch rollers are dirty. Clean them (see page 38).

Noise increases or the high frequencies are missing.

•The record/playback heads are magnetized. Demagnetize them (see page 38).

continued

Information Additional