3Connect the VIDEO OUT jack to the video input jack on your TV with the supplied video connecting cord.
When using a TV
Turn on your TV and set the input selector to video input so you can view the pictures from the system.
4Set SYSTEM SELECT (color system) to PAL or NTSC depending on the color system of your TV.
SYSTEM
SELECT
NTSC 
PAL
AUTO
If your TV automatically changes the color system according to the input signal:
Set SYSTEM SELECT to AUTO.
The video signal will be output in the color system of the VIDEO CD being played back.
If the color system of your TV is NTSC:
Set SYSTEM SELECT to NTSC.
When this system is selected, video images recorded in the PAL system will be stretched vertically, and the upper and lower parts of the picture will be cut off.
If the color system of your TV is PAL:
Set SYSTEM SELECT to PAL (the factory setting).
When this system is selected, video images recorded in the NTSC system will be stretched horizontally, and the upper and lower parts of the screen will be masked in black.
Note
Be sure to turn off the system before you change the SYSTEM SELECT setting.
5For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage.
VOLTAGE
SELECTOR
110V~120V
220V~240V
6Connect the power cord to a wall outlet.
If the plug does not fit the wall socket, detach the supplied plug adaptor (only for models equipped with an adaptor).
continued
Started Getting
5