Sony CPD-100SFT manual Getting Started, Using Your Monitor, Preset and User Modes

Getting Started

Before using this monitor, please make sure that the following items are included in your package: Multiscan 100sf/200sf monitor (1), power cord (1), HD15 (Female) - HD15 (Male without the No.9 pin) adapter (1), warranty card (1) and this operating instruction manual (1).

This monitor will sync with any IBM or compatible system equipped with VGA or greater graphics capability. Although this monitor will sync to other platforms running at horizontal frequencies between 30 and 70 kHz (Multiscan 100sf), 30 and 80kHz (Multiscan 200sf), including Macintosh and Power Macintosh system, a cable adapter is required. Please consult your dealer for advice on which adapter is suitable for your needs.

Step 1: With the computer switched off, attach the video signal cable to the video output.

IBM or compatible
computer	to video output
	HD15 - HD15 adapter may
Apple computer	be required∗
	to video output
	Macintosh adapter (not supplied)

∗For the customers using IBM PC or IBM compatible system which is not compatible with DDC2AB and DDC2B+

This monitor uses a No.9 pin in the video signal connector for DDC2AB and DDC2B+ compatibility.

Some PC systems which are not compatible with either DDC2AB or DDC2B+ may not accept the No.9 pin. If you are not sure whether your PC system accepts the No.9 pin or not, use the HD15 (Female) - HD15 (Male without the No.9 pin) adapter (supplied). Make sure that the male side (without the No.9 pin) is connected to the computer.

Step 2: With the monitor switched off, attach the power

cord to the monitor and the other end to a power outlet.

Power cord (supplied)

to a power outlet

Step 3: Turn on the monitor and computer.

Step 4: If necessary, adjust the user controls according to your personal preference.

The installation of your Multiscan 100sf/200sf is complete. Enjoy your monitor.

1)VGA is a trademark of IBM Corporation.

2)VESA is a trademark of the non-profit organization, Video Electronics Standard Association.

3)Macintosh is a trademark of Apple Computer Inc.

4)Windows® is a registered trademark of Microsoft Corporation in the United States and other countries.

Using Your Monitor

Preset and User Modes

The Multiscan 100sf/200sf has factory preset modes for the 7 most popular industry standards for true “plug and play” capability. For less common modes, the Multiscan 100sf/200sf ’s Digital Multiscan Technology will perform all of the complex adjustments necessary to ensure a high quality picture for any timing between

30 and 70Ê kHz (Multiscan 100sf ), 30 and 80Ê kHz (Multiscan 200sf ).

CPD-100SFT

No.	Resolution		Horizontal	Vertical	Graphic mode
	(dots × lines)		frequency	frequency
1	640 × 480		31.5 kHz	60 Hz	VGA Graphic 1)
2	800 × 600		46.9 kHz	75 Hz	VESA 2)
3	800 × 600		53.7 kHz	85 Hz	VESA2)
4	832 × 624		49.7 kHz	75 Hz	Macintosh
					16” Color 3)
5	1024	× 768	60.0 kHz	75 Hz	VESA 2)
6	1024	× 768	68.7 kHz	85 Hz	VESA 2)
7	1280	× 1024	64.0 kHz	60 Hz	VESA 2)
CPD-200SFT
No.	Resolution		Horizontal	Vertical	Graphic mode
	(dots ×lines)		frequency	frequency
1	640 × 480		31.5 kHz	60 Hz	VGA Graphic 1)
2	800 × 600		46.9 kHz	75 Hz	VESA 2)
3	800 × 600		53.7 kHz	85 Hz	VESA2)
4	832 × 624		49.7 kHz	75 Hz	Macintosh
					16” Color 3)
5	1024	× 768	60.0 kHz	75 Hz	VESA 2)
6	1024	× 768	60.2 kHz	75 Hz	Macintosh
					19” Color 3)
7	1024	× 768	68.7 kHz	85 Hz	VESA 2)
8	1152	× 870	68.7 kHz	75 Hz	Macintosh
					21” Color 3)
9	1280	× 1024	80.0 kHz	75 Hz	VESA 2)

For the customers using the Windows® 4) 95

Install the new model information of the Sony computer display from “Windows 95 Monitor Information Disk” into your PC. (To install the file, refer to the attached “About the Windows 95 Monitor Information Disk/File”).

This monitor complies with “VESA DDC,” the standards of Plug&Play. If your PC/graphic board complies with DDC, select “Plug and Play Monitor (VESA DDC)” or this monitor’s model name (CPD-100SFT or CPD-200SFT) as “Monitor type” from “Control Panel” on Windows 95. Some PC/graphic boards do not comply with DDC. Even if they comply with DDC, they may have some problems on connecting this monitor. In this case, select this monitor’s model name (CPD-100SFT or CPD-200SFT) as “Monitor type” on Windows 95.

Recommended horizontal timing conditions

Horizontal sync width should be: >1.0 µsec.

Horizontal blanking width should be: >3.6 µsec. (Multiscan 100sf)/ >3.0 µsec. (Multiscan 200sf)

Vertical sync width should be: < 560 µsec.

Note

CPD-100SFT does not apply to Macintosh 21” color mode.

4