Adjustments
When one of the |
| p Before adjusting the items, turn on the unit and feed the | ||||
adjustment is necessary. |
|
|
|
| video signal from the connected computer/work station. | |
You can, however, adjust the picture to your preferences by |
| p Adjustments will be stored automatically. | ||||
following the procedure described below. |
|
|
|
|
| |
You can adjust the all items on the OSD (On Screen Display). |
|
|
| |||
Control Panel |
|
|
|
|
|
|
|
|
|
|
| POWER |
|
RESET | COLOR | GEOM | SIZE | CENTER | SAVING | POWER |
| ||||||
|
| |||||
Adjusting the Picture Brightness |
| Adjusting the Picture Centering |
The adjustment data becomes the common setting for all input signals.
1 Press the ¬ ?//button.
The “CONTRAST/BRIGHTNESS” OSD appears.
CONTRAST/BRIGHTNESS | |
100 | 50 |
31 . 5kHz/70Hz | |
Horizontal | Vertical |
frequency∗ | frequency∗ |
2 Press the ¬ ?//buttons to adjust picture brightness.
?. . . for less brightness /. . . for more brightness
The “CONTRAST/BRIGHTNESS” OSD disappears 3 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
Adjusting the Picture Contrast
The adjustment data becomes the common setting for all input signals.
1 Press the > >/.button.
The “CONTRAST/BRIGHTNESS” OSD appears.
CONTRAST/BRIGHTNESS | |
100 | 50 |
31 . 5kHz/70Hz | |
Horizontal | Vertical |
frequency∗ | frequency∗ |
2 Press the > >/.buttons to adjust picture contrast.
>. . . for more contrast
.. . . for less contrast
The “CONTRAST/BRIGHTNESS” OSD disappears 3 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
The adjustment data becomes the individual setting for each input signal received.
1 Press the CENTER button. The “CENTER” OSD appears.
CENTER | CENTER |
| |
32 | 68 |
2 For vertical adjustment Press the > >/.buttons.
>. . . to move up
.. . . to move down
For holizontal adjustment
Press the ¬?//buttons.
?. . . to move left /. . . to move right
To erase the “CENTER” OSD, press the CENTER button again. The “CENTER” OSD automatically disappears 10 seconds after you release the buttons.
To reset, press the RESET button while the OSD is on.
∗The horizontal and vertical frequencies for each input signal received appear on the “CONTRAST/BRIGHTNESS” OSD.
EN
5
