Sony CPD-110EST, CPD-210EST Additional settings (DEGAUSS, CANCEL MOIRE), Resetting the adjustments (RESET), +button, Press the − button, Press the + button, Cancelling the moire

Additional settings (DEGAUSS/

CANCEL MOIRE)

You can manually degauss (demagnetize) the screen, and cancel the moire.

1Press the MENU button.

The main MENU appears on the screen.

2Press the +/− buttons to highlight DEGAUSS/CANCEL MOIRE and press the ENTER button.

The DEGAUSS/CANCEL MOIRE menu appears on the screen.

3Press the ENTER button to select the desired adjustment item.

Adjust the selected item according to the following instructions.

Degaussing the screen

The monitor is automatically demagnetized when the power is turned on.

To manually degauss the monitor, first press the ENTER button to select (DEGAUSS). Then press the

+button.

The screen is degaussed for about 5 seconds. If a second degauss cycle is needed, allow a minimum interval of 20 minutes for the best result.

Cancelling the moire

If elliptical or wavy patterns appear on the screen, adjust the moire cancellation level.

To adjust the amount of moire cancellation, first press

the ENTER button to select (CANCEL MOIRE). Then press the +/− buttons until the moire effect is at a minimum.

*Moire is a type of natural interference which produces soft, wavy lines on your screen. It may appear due to interference between the pattern of the picture on the screen and the phosphor pitch pattern of the monitor.

Example of moire

Resetting the adjustments (RESET)

This monitor has the following two reset methods. Use the RESET menu to reset the adjustments.

1Press the MENU button.

The main MENU appears on the screen.

2Press the +/− buttons to highlight 0 RESET and press the ENTER button.

The RESET menu appears on the screen.

Reset the settings according to the following instructions.

Resetting all of the adjustment data for the current input signal (MODE)Press the − button.

The MODE item is selected. All of the adjustment data for the current input signal is reset.

Note that the following items are not reset by this method:

•on-screen menu language (page 7)

•picture’s rotation (page 11)

Resetting all of the adjustment data to factory preset levels (ALL)Press the + button.

The ALL item is selected. With the exception of the USER settings in the COLOR menu, all of the adjustment data for all input signals is reset to the factory preset levels.

Note

The monitor’s buttons will not operate for about 5 seconds when ALL is selected.

12