Adjusting the Convergence

The adjustment data becomes the common setting for all input signals.

1

Press the CONV button.

 

 

The “CONVERGENCE” OSD (On Screen Display)

 

appears.

 

 

CONVERGENCE

 

CONV

 

 

0

23

2

For vertical adjustment

 

 

Press the > >/.buttons.

 

>. . . to move Red up and Blue down

.. . . to move Red down and Blue up

For horizontal adjustment

Press the ¬ ?//buttons.

?. . . to move Red to the right and Blue to the left /. . . to move Red to the left and Blue to the right

To erase the “CONVERGENCE” OSD, press the CONV button again.

The “CONVERGENCE” OSD automatically disappears 10 seconds after you release the buttons.

To reset, press RESET button while the OSD is on.

Setteing the Color Temperature

The selected color temperature becomes the common setting for all input signals. (The factory presetting is 9300K.)

1 Press COLOR button.

The “COLOR TEMPERATURE” OSD (On Screen Display) appears.

COLOR TEMPERATURE

COLOR

9300K

 

6500K

 

5000K

50

SELECT

2 Adjust with the > >/.and ¬ ?//buttons.

To select 9300K, 6500K, or 5000K

Press > >/.buttons.

To obtain the desired color temperature between 5000K and 9300K

1 Press > >/.buttons to select user mode (

).

EN

 

COLOR TEMPERATURE

 

9300K

 

 

6500K

 

 

5000K

50

 

 

 

SELECT

SET

 

2Press ¬ ?//buttons.

?. . . for lower temperature (to be reddish) /. . . for higher temperature (to be blueish)

Your most recent adjusted color temperature will be recalled by pressing > >/.button.

The factory presetting is 6500K for the user adjustable mode of color temperature.

To erase the “COLOR TEMPERATURE” OSD, press the COLOR button again.

The “COLOR TEMPERATURE” OSD automatically disappears 10 seconds after you release the buttons.

To reset, press RESET button while the OSD is on.

7

Page 7
Image 7
Sony CPD-20SF2T5 manual Adjusting the Convergence, Setteing the Color Temperature, For vertical adjustment