Using the GEOM (Geometry) On- screen Display

The GEOM (geometry) settings allow you to adjust the shape and orientation of the picture.

Once the rotation is adjusted, it will be stored in memory for all input signals received. All other adjustments will be stored in memory for the current input signal.

1Press the MENU button.

The MENU OSD appears.

MENU

2Press the ¬./>and >?//buttons to select “

GEOM,” and press the MENU button again.

The GEOMETRY OSD appears.

GEOMETRY

26

ROTATION

3Press the ¬./>buttons to select the item you want to adjust.

Select

To

ROTATION

adjust the picture rotation

PINCUSHION

adjust the picture sides

PIN BALANCE

adjust the picture side balance

KEYSTONE

adjust the picture width

KEY BALANCE

adjust the picture shape balance

Customizing Your Monitor

4Press the >?//buttons to adjust the settings.

ForPress

ROTATION /. . . to rotate the picture clockwise

?. . . to rotate the picture counterclockwise

PINCUSHION /. . . to expand the picture sides

?. . . to contract the picture sides

PIN BALANCE /. . . to move the picture sides to the right GB

?. . . to move the picture sides to the left

KEYSTONE

/. . . to increase the picture width at the

 

top

?. . . to decrease the picture width at the top

KEY BALANCE /. . . to move the top of the picture to

the right

?. . . to move the top of the picture to the left

The OSD automatically disappears after about 30 seconds. To close the OSD, press the MENU button again.

To reset, press the RESET button while the OSD is on.

The selected item is reset to the factory setting.

11